2018年7月19日星期四

Vacuum Annealing Furnace Maintenance

When using a vacuum annealing furnace, sometimes the furnace will fail. At this time, many maintenance personnel will feel the cause of the failure is difficult to find, often a small fault to the entire furnace from top to bottom in and out of a comprehensive inspection , it will feel very time-consuming and laborious.

For those who have just been engaged in the maintenance of vacuum annealing furnaces, the overall understanding of the vacuum quenching furnace, the vacuum oil quenching furnace, and the vacuum heat treatment furnace is quickly established, and it is the most important to understand the relationship between the composition of the equipment and the various components. All the faults are resolved as if they were different from those experienced in the past, but after they are resolved, they can be summarized in several systems or several categories of equipment.

The purpose of vacuum annealing furnace maintenance is to restore the performance of the vacuum annealing furnace. Once the vacuum annealing furnace has completely or partially lost its use performance, the management personnel of the vacuum annealing furnace must determine the general cause of the failure based on the fault phenomenon, and then determine the scale of repair, and then organize the repair. But to be able to accurately determine the cause of the failure, it is required to understand the structure, working principle, function, maintenance requirements and maintenance status of the equipment.

Vacuum Annealing Furnace Maintenance and Care:
1, the use of personnel must always remove the furnace iron oxide shavings and other things, at least once within two weeks.
2. The user should always inject proper amount of oil into the rotating parts such as the bearing seat to ensure the flexible transmission of the rotating part.
3. If the heating element is used after a short period of time, it must not be bumped or kinked to avoid breaking.
4. After the electric furnace is used for a period of time, if the lining is slightly damaged (such as small cracks or refractory bricks fall off and loosen), the mud lining can be used for repair and repair. If the furnace lining is seriously damaged, it should be rebuilt according to the lining pattern.

没有评论:

发表评论